/*=========================================================================

  Program:   Insight Segmentation & Registration Toolkit
  Module:    $RCSfile: ConnectedThresholdImageFilter.cxx,v $
  Language:  C++
  Date:      $Date: 2005/08/31 14:58:36 $
  Version:   $Revision: 1.33 $

  Copyright (c) Insight Software Consortium. All rights reserved.
  See ITKCopyright.txt or http://www.itk.org/HTML/Copyright.htm for details.

     This software is distributed WITHOUT ANY WARRANTY; without even 
     the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR 
     PURPOSE.  See the above copyright notices for more information.

=========================================================================*/
#if defined(_MSC_VER)
#pragma warning ( disable : 4786 )
#endif

#ifdef __BORLANDC__
#define ITK_LEAN_AND_MEAN
#endif




//  Software Guide : BeginCommandLineArgs
//  INPUTS: {BrainProtonDensitySlice.png}
//  OUTPUTS: {ConnectedThresholdOutput1.png}
//  60 116 150 180
//  Software Guide : EndCommandLineArgs
//  Software Guide : BeginCommandLineArgs
//  INPUTS: {BrainProtonDensitySlice.png}
//  OUTPUTS: {ConnectedThresholdOutput2.png}
//  81 112 210 250
//  Software Guide : EndCommandLineArgs
//  Software Guide : BeginCommandLineArgs
//  INPUTS: {BrainProtonDensitySlice.png}
//  OUTPUTS: {ConnectedThresholdOutput3.png}
//  107 69 180 210
//  Software Guide : EndCommandLineArgs

// Software Guide : BeginLatex
//
// The following example illustrates the use of the
// \doxygen{ConnectedThresholdImageFilter}. This filter uses the flood fill
// iterator. Most of the algorithmic complexity of a region growing method
// comes from visiting neighboring pixels. The flood fill iterator assumes
// this responsibility and greatly simplifies the implementation of the
// region growing algorithm. Thus the algorithm is left to establish a
// criterion to decide whether a particular pixel should be included in
// the current region or not.
//
// \index{itk::FloodFillIterator!In Region Growing}
// \index{itk::ConnectedThresholdImageFilter}
// \index{itk::ConnectedThresholdImageFilter!header}
//
// The criterion used by the ConnectedThresholdImageFilter is based on an
// interval of intensity values provided by the user. Values of lower and
// upper threshold should be provided. The region growing algorithm includes
// those pixels whose intensities are inside the interval.
//
// \begin{equation}
// I(\mathbf{X}) \in [ \mbox{lower}, \mbox{upper} ]
// \end{equation}
//
// Let's look at the minimal code required to use this algorithm. First, the
// following header defining the ConnectedThresholdImageFilter class
// must be included.
//
// Software Guide : EndLatex 


// Software Guide : BeginCodeSnippet
#include "itkConnectedThresholdImageFilter.h"
// Software Guide : EndCodeSnippet


#include "itkImage.h"
#include "itkCastImageFilter.h"


//  Software Guide : BeginLatex
//
//  Noise present in the image can reduce the capacity of this filter to grow
//  large regions. When faced with noisy images, it is usually convenient to
//  pre-process the image by using an edge-preserving smoothing filter. Any of
//  the filters discussed in Section~\ref{sec:EdgePreservingSmoothingFilters}
//  could be used to this end. In this particular example we use the
//  \doxygen{CurvatureFlowImageFilter}, hence we need to include its header
//  file.
//
//  Software Guide : EndLatex 

// Software Guide : BeginCodeSnippet
#include "itkCurvatureFlowImageFilter.h"
// Software Guide : EndCodeSnippet


#include "itkImageFileReader.h"
#include "itkImageFileWriter.h"


int main( int argc, char *argv[])
{
	/*
  if( argc < 7 )
    {
    std::cerr << "Missing Parameters " << std::endl;
    std::cerr << "Usage: ";
    std::cerr << " inputImage  outputImage seedX seedY lowerThreshold upperThreshold" << std::endl;
    return 1;
    }
*/

  //  Software Guide : BeginLatex
  //  
  //  We declare the image type based on a particular pixel type and
  //  dimension. In this case the \code{float} type is used for the pixels
  //  due to the requirements of the smoothing filter.
  //
  //  Software Guide : EndLatex 

  // Software Guide : BeginCodeSnippet
  typedef   float           InternalPixelType;
  const     unsigned int    Dimension = 3;
  typedef itk::Image< InternalPixelType, Dimension >  InternalImageType;
  // Software Guide : EndCodeSnippet


  typedef unsigned char OutputPixelType;
  typedef itk::Image< OutputPixelType, Dimension > OutputImageType;
  typedef itk::CastImageFilter< InternalImageType, OutputImageType >
    CastingFilterType;
  CastingFilterType::Pointer caster = CastingFilterType::New();
                        
  // We instantiate reader and writer types
  //
  typedef  itk::ImageFileReader< InternalImageType > ReaderType;
  typedef  itk::ImageFileWriter<  OutputImageType  > WriterType;

  ReaderType::Pointer reader = ReaderType::New();
  WriterType::Pointer writer = WriterType::New();

  reader->SetFileName( "Normal107-T2.mha" );
  writer->SetFileName( "Normal107-T2.mhd" );


  //  Software Guide : BeginLatex
  //  
  //  
  //  The smoothing filter is instantiated using the image type as
  //  a template parameter.
  //
  //  Software Guide : EndLatex 

  // Software Guide : BeginCodeSnippet
  typedef itk::CurvatureFlowImageFilter< InternalImageType, InternalImageType >
    CurvatureFlowImageFilterType;
  // Software Guide : EndCodeSnippet


  //  Software Guide : BeginLatex
  //  
  //  Then the filter is created by invoking the \code{New()} method and
  //  assigning the result to a \doxygen{SmartPointer}.
  //
  //  Software Guide : EndLatex 

  // Software Guide : BeginCodeSnippet
  CurvatureFlowImageFilterType::Pointer smoothing = 
                         CurvatureFlowImageFilterType::New();
  // Software Guide : EndCodeSnippet


  //  Software Guide : BeginLatex
  //  
  //  We now declare the type of the region growing filter. In this case it is
  //  the ConnectedThresholdImageFilter. 
  //
  //  Software Guide : EndLatex 

  // Software Guide : BeginCodeSnippet
  typedef itk::ConnectedThresholdImageFilter< InternalImageType, 
                                    InternalImageType > ConnectedFilterType;
  // Software Guide : EndCodeSnippet

  //  Software Guide : BeginLatex
  //  
  //  Then we construct one filter of this class using the \code{New()}
  //  method.
  //
  //  Software Guide : EndLatex 

  // Software Guide : BeginCodeSnippet
  ConnectedFilterType::Pointer connectedThreshold = ConnectedFilterType::New();
  // Software Guide : EndCodeSnippet


  //  Software Guide : BeginLatex
  //  
  //  Now it is time to connect a simple, linear pipeline. A file reader is
  //  added at the beginning of the pipeline and a cast filter and writer
  //  are added at the end. The cast filter is required to convert
  //  \code{float} pixel types to integer types since only a few image file
  //  formats support \code{float} types.
  //
  //  Software Guide : EndLatex 

  // Software Guide : BeginCodeSnippet
  smoothing->SetInput( reader->GetOutput() );
  connectedThreshold->SetInput( smoothing->GetOutput() );
  caster->SetInput( connectedThreshold->GetOutput() );
  writer->SetInput( caster->GetOutput() );
  // Software Guide : EndCodeSnippet


  //  Software Guide : BeginLatex
  //
  //  The CurvatureFlowImageFilter requires a couple of parameters to
  //  be defined. The following are typical values for $2D$ images. However
  //  they may have to be adjusted depending on the amount of noise present in
  //  the input image.
  //
  //  Software Guide : EndLatex 

  // Software Guide : BeginCodeSnippet
  smoothing->SetNumberOfIterations( 1 );
  smoothing->SetTimeStep( 0.125 );
  // Software Guide : EndCodeSnippet


  //  Software Guide : BeginLatex
  //
  //  The ConnectedThresholdImageFilter has two main parameters to be
  //  defined. They are the lower and upper thresholds of the interval in
  //  which intensity values should fall in order to be included in the
  //  region. Setting these two values too close will not allow enough
  //  flexibility for the region to grow. Setting them too far apart will
  //  result in a region that engulfs the image.
  //
  //  \index{itk::ConnectedThresholdImageFilter!SetUpper()}
  //  \index{itk::ConnectedThresholdImageFilter!SetLower()}
  //
  //  Software Guide : EndLatex 

  //const InternalPixelType lowerThreshold = atof( 155.0 );
  //const InternalPixelType upperThreshold = atof( 235.0 );

  // Software Guide : BeginCodeSnippet
  connectedThreshold->SetLower(  440.0  );
  connectedThreshold->SetUpper(  490.0  );
  // Software Guide : EndCodeSnippet


  //  Software Guide : BeginLatex
  //
  //  The output of this filter is a binary image with zero-value pixels
  //  everywhere except on the extracted region. The intensity value set
  //  inside the region is selected with the method \code{SetReplaceValue()}
  //
  //  \index{itk::ConnectedThresholdImageFilter!SetReplaceValue()}
  //
  //  Software Guide : EndLatex 

  // Software Guide : BeginCodeSnippet
  connectedThreshold->SetReplaceValue( 255 );
  // Software Guide : EndCodeSnippet


  //  Software Guide : BeginLatex
  //
  //  The initialization of the algorithm requires the user to provide a seed
  //  point. It is convenient to select this point to be placed in a
  //  \emph{typical} region of the anatomical structure to be segmented. The
  //  seed is passed in the form of a \doxygen{Index} to the \code{SetSeed()}
  //  method.
  //
  //  \index{itk::ConnectedThresholdImageFilter!SetSeed()}
  //
  //  Software Guide : EndLatex 

  InternalImageType::IndexType  index;
  
  //index[0] = atoi( 123 );
  //index[1] = atoi( 235 );

  index[0] = 219;
  index[1] = 247;
  index[2] = 82;

  // Software Guide : BeginCodeSnippet
  connectedThreshold->SetSeed( index );
  // Software Guide : EndCodeSnippet

  
  //  Software Guide : BeginLatex
  //  
  //  The invocation of the \code{Update()} method on the writer triggers the
  //  execution of the pipeline.  It is usually wise to put update calls in a
  //  \code{try/catch} block in case errors occur and exceptions are thrown.
  //
  //  Software Guide : EndLatex 

  // Software Guide : BeginCodeSnippet
  try
    {
    writer->Update();
    }
  catch( itk::ExceptionObject & excep )
    {
    std::cerr << "Exception caught !" << std::endl;
    std::cerr << excep << std::endl;
    }
  // Software Guide : EndCodeSnippet


  //  Software Guide : BeginLatex
  //
  //  Let's run this example using as input the image
  //  \code{BrainProtonDensitySlice.png} provided in the directory
  //  \code{Examples/Data}. We can easily segment the major anatomical
  //  structures by providing seeds in the appropriate locations and defining
  //  values for the lower and upper thresholds.
  //  Figure~\ref{fig:ConnectedThresholdOutput} illustrates several examples of
  //  segmentation. The parameters used are presented in
  //  Table~\ref{tab:ConnectedThresholdOutput}.
  //
  //  \begin{table}
  //  \begin{center}
  //  \begin{tabular}{|l|c|c|c|c|}
  //  \hline
  //  Structure & Seed Index & Lower & Upper & Output Image \\ \hline 
  //  White matter & $(60,116)$ & 150 & 180 & Second from left in Figure \ref{fig:ConnectedThresholdOutput} \\ \hline
  //  Ventricle    & $(81,112)$ & 210 & 250 & Third  from left in Figure \ref{fig:ConnectedThresholdOutput} \\ \hline
  //  Gray matter  & $(107,69)$ & 180 & 210 & Fourth from left in Figure \ref{fig:ConnectedThresholdOutput} \\ \hline
  //  \end{tabular}
  //  \end{center}
  //  \itkcaption[ConnectedThreshold example parameters]{Parameters used for
  //  segmenting some brain structures shown in
  //  Figure~\ref{fig:ConnectedThresholdOutput} with the filter
  //  \doxygen{ConnectedThresholdImageFilter}.\label{tab:ConnectedThresholdOutput}}
  //  \end{table}
  //
  // \begin{figure} \center
  // \includegraphics[width=0.24\textwidth]{BrainProtonDensitySlice.eps}
  // \includegraphics[width=0.24\textwidth]{ConnectedThresholdOutput1.eps}
  // \includegraphics[width=0.24\textwidth]{ConnectedThresholdOutput2.eps}
  // \includegraphics[width=0.24\textwidth]{ConnectedThresholdOutput3.eps}
  // \itkcaption[ConnectedThreshold segmentation results]{Segmentation results 
  // for the ConnectedThreshold filter for various seed points.}
  // \label{fig:ConnectedThresholdOutput}
  // \end{figure}
  //
  //  Notice that the gray matter is not being completely segmented.  This
  //  illustrates the vulnerability of the region growing methods when the
  //  anatomical structures to be segmented do not have a homogeneous
  //  statistical distribution over the image space. You may want to
  //  experiment with different values of the lower and upper thresholds to
  //  verify how the accepted region will extend.
  //
  //  Another option for segmenting regions is to take advantage of the
  //  functionality provided by the ConnectedThresholdImageFilter for
  //  managing multiple seeds. The seeds can be passed one by one to the
  //  filter using the \code{AddSeed()} method. You could imagine a user
  //  interface in which an operator clicks on multiple points of the object
  //  to be segmented and each selected point is passed as a seed to this
  //  filter.
  //
  //  Software Guide : EndLatex 


  return 0;
}